Biosafety Cabinet Class II A2

Product Description

Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely sed in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading air borne infection. 

Types We offer three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Belowis short description about all types we offer: Type A2: recirculate approximately 70% air and 30% exhaust Type B1: recirculate approximately 30% air and 70% exhaust Type B2: Does not recirculate but exhaust 100% air

 Construction Our cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today.

•  There are three different MOC used. 
• Complete Stainless Steel 304 / 316
•   Inner Stainless Steel, Outer Mild Steel 
• Stainless Steel bench, rest mild Steel 
• Air Circulation of Class II A2 

In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.95% efficiency HEPA filters for particle size 0.3microns in our biological class 2 type A2 safety cabinets. These air filters are of ISO5 / Class 100 quality. Inflow velocity remains approx. 105 fpm (0.5 m/sec) while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and30% exhaust. 

Standard Accessories 

Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UVlamps are fitted inside working zone in such a way that the operator cannot see them directly. Microprocessor controlled mechanism allows UV on only when door is closed. Auto sensors facilitate to run blower after opening of door only. User can setwarm time as per convenience which in turn will tun on the FL light only after settime and door open controlled by microprocessor. Electrical sockets are fitted to runany instrument under the working area; in addition, service fixtures for air, gas.